Shandong Better Onward Machinery Co., Ltd.

We have more than 16 years′ experience in production and exporting, will provide more professional service and better price for you.

H-T40 Hydraulic Driven Polyurea and Polyurethane Spraying Machine with Touch Screen

H-T40 Hydraulic Driven Polyurea and Polyurethane Spraying Machine with Touch Screen

Product Item:

            
  • Product Detail
  • FAQs

Introduction of Polyurea and Polyurethane Spraying Machine
1. Our spraying machine gained CE certification.
2. It can be used for polyurea spraying, rigid foam polyurethane spraying, all water polyurethane spraying, polyurethane pouring and other materials.
3. Touch screen control system
With 7" touch screen display and PLC programming system, you can choose the working mode of different raw materials. The operation is simple, fast and highly intelligent.
4. One click start and stop
Click automatic operation to complete the heating of raw materials, start the hydraulic station and start the machine. When the working conditions are met, the machine will run automatically. Click close, the machine stops heating, the hydraulic station stops working, and automatic stop function to reset state.
5. Bias voltage protection
During the automatic operation of the machine, if the pressure difference on both sides exceeds the allowable range, the machine will automatically stop operation to avoid uneven mixing caused by excessive pressure difference.
6. Low temperature protection
During the automatic operation of the machine, when the temperature of raw materials fails to meet the working requirements, the machine will be temporarily stopped to avoid uneven mixing due to low temperature.

7. Heating mode in winter and summer

Different heating modes can be selected according to different seasons and construction ambient temperatures to make the heating mode more reasonable, accurate, fast and high heat utilization.
8. Hydraulic drive
The hydraulic station provides output energy, pressure stability is higher and power is stronger, which is not affected by seasons.
9.Imported accessories
Adopt the original imported plunger pump and solenoid valve, with high energy conversion rate, stable performance and durability.
10. Normal construction in cold season
The heater on one side of the main engine is heated by six cylinders, and the pipeline heating adopts 3500W isolation transformer, which has high power, high efficiency and uniform heating.

Parameter of Polyurea and Polyurethane Spraying Machine

Product namePolyurea and Polyurethane Spraying Machine 
ModelH-T40
Power source380V
Total power26kw
Heating power22kw
Transformer power3.5kw
Driven typeHydraulic driven
Max. Output pressure36Mpa
Material proportion1:1
Material output2-10kg/min
Insulation pipelineSupporting 105m
Net weight260kgs

Images of Polyurea and Polyurethane Spraying Machine










PREVIOUS:YT27 Air Leg Rock drill

NEXT:Mining Roof Support Hydraulic Prop

Leave a Reply

Leave a message

+86 18553788237

whatsapp

nina@betteronwardmachinery.com